1. Lathe machine for tool joint


       

       

      This pipe lathe machine is manual type, they are widely used in oil, chemical, geological prospecting industrial etc for kinds of pipe thread turning. Especially suitable for tool joint rough machining and semi-finishing machining. It also can be used as conventional lathe, which can cut excircle surface, inner hole,  end face, circular arc,taper, step, chamfer, metric/inch thread etc:

                   Items

      Unit

      HY-1320

      Max. swing diameter over bed

      mm

      φ680

      Max. swing diameter over saddle

      mm

      φ400

      Max. diameter of workpiece

      mm

      φ190

      Max. length of workpiece

      mm

      1000

      Manual chuck diameter

      mm

      φ500

      Spindle speed range

      r/min

      20~350

      Spindle bore diameter

      mm

      φ200      

      Carriage quick moving speed

      m/min

      3.8

      Distance from tool base to spindle center

      mm

      32

      Tool section dimension

      mm

      32×32

      Tool rest turning angle

       

      ±90°

      Spindle center height

      mm

      1100

      Max. travel of horizontal tool rest

      mm

      445

      Max. travel of small tool rest

      mm

      200

      Tailstock sleeve diameter

      mm

      100

      Tailstock sleeve stroke

      mm

      250

      Tailstock sleeve tape hole

       

      Mohs 5#

      Tip taper

       

      Mohs 5#

      Main motor model

       

      YPNC-33.3-11-B-B3

      Main motor power

      kW

      11

      Roughness

      mm

      Ra1.6~Ra3.2

      Machine weight

      5700

      Machine dimension(L×W×H)

      mm

      3700*2000*1600

      日本黄色片